Professional Hot Crack Sealing
Our professional cracksealing crew is shown using a powered
sealant applicator with heated hose. The best method of application. Priot to
this we use a heat lance and any other necessary measures to clean the cracks in
the proper manner for the most cost-effective, most durable seal.
Federal Research (SHRP-P106 data)
Shows Crack Sealing Using the Method Used by Seal-Kote to be the
Single Most Cost-Effective Asphalt Maintenance Procedure.
Crack sealing is the very most cost effective pavement maintenance service we
provide. Parking lots and driveways vary according to the types, size, and
amount of cracks. Deep and wide cracks need to be cleaned and sealed to keep
water out. Water will further erode cracks, and work deep into the asphalt
eventually causing costly pot-holes and failure. Today there are several new
advances in crack sealants. On commercial applications Seal-Kote Corp will blow
hot compressed air in cracks to clean virtually all dirt debris and vegetation
to create a perfectly cleaned and etched crack for the hot crack sealant to
adhere to the walls of the cracks. This is a far superior method of preparation
than simply blowing over the crack and usually far more cost effective than
routing cracks. In the case of deep but narrow cracks, where the depth of the
cracks is far greater than the width of the cracks we may recommend routing to
open up the cracks.
     
| 
